302700 Harwil Flow Switch, Harwil Q8DS, 1"mpt, w/Drag Strip Q8DS/A/10502 Q8DS/A/10593 607976 6656E Q8DSA
The Harwil flow switch is prepared for swimming pools and spas. 302700 Harwil flow switch is installed in the pool or spa plumbing system that monitors the water flow. The Harwil flow switch 302700 can notice a lack of water flow, indicating a pool or spa part trouble. This particular flow switch has a 1" MPT (Male Pipe Thread) rated for 25A. It also has a drag strip, enabling reduced water turbulence and proper flow detection. Overall, the 302700 Harwil flow switch is a trustworthy and important part of keeping the appropriate operation of your pool or spa.
Cross References |
302700 , 390491, 6656-LBAY, 6656E, HWL-851-9700, Q8DS/A/10593, Q8DSA |
Product Specifications
Part Type |
Flow Switch |
Manufacturer |
Harwil |
Flow Switch Application |
Multiple |
Model |
Q-8DS |
Plumbing Connection Size |
1” |
Plumbing Connection Type |
Male Pipe Thread (mpt) |
Flow Switch Amperage |
25A |
Minimum Flow Rate |
8 gpm |
Wide Operating Range |
5-80 gpm |
Pipe Size |
1 1/2" or 2” |
NPT Threaded Fitting |
1” |
Frequently Asked Questions
Is this an OEM part?
Yes, this is an OEM Harwil flow switch.
Can you explain to me how to configure the Harwil flow switch?
The Harwil flow switch's user manual can be accessed online for installation instructions. After the pump, the flow switch is normally installed in a pool or spa's piping system before the heater and filter.
Can the 302700 Harwil flow switch function with any pool or spa device?
The 302700 Harwil flow switch functions with several heaters and filters found in pool and spa setups. However, if you want to be sure of compatibility, it's advised to check with our specialists' configuration.
How frequently must the Harwil flow switch test?
The Harwil flow switch should be checked annually at the very least to secure its continued functionality. But, if you detect a change in the water flow or any other problems with your pool or spa equipment, you should check the flow switch right once.
When using a 302700 Harwil flow switch, is it possible to change the drag strip?
If required, you can change the 302700 Harwil flow switch's drag strip.