Common Hot-Tub problems and how to deal with them
We know that you want to keep your hot tub clean, fresh, safe and relaxing. But how can you do that without breaking the bank when you know that maintaining and replacing hot tub parts costs money? The answer here is to find ways to prevent the hot tub problems from happening, and take note of the practical and almost cost-free solutions available.
No need to worry. We're here to help you understand the common hot tub problems and the ways to prevent and solve them almost cost-free. We'd also present you here the widest range of selection of brands that have created today's most trusted spa sanitizers, balancers, shock treatments, mineral purifiers, defoamers, filter cleaners, scale and stain removers, and other cleaner and care products that will both prevent and solve your hot tub issues.
To know the top brands that give you such solutions, refer HERE:
Problem 1: No Heat
Your hot tub is just a water storage tank if it doesn't heat up. If you find that your hut tub is not heating up properly or not at all, the main cause would probably be either a problematic heater element in your pump or blockages stuck in the tub's circulation system, especially in the filters.
To prevent these no-heat issues resulting from filter problems, it helps if you rinse the filters once in a while with a strong stream of a hose before soaking them into a tub-specific filter cleaner. A good practice is to also regularly use Filter Flosser's Cartridge Cleaning or Flosser Tool to unclog the filters.
We're recommending this flosser tool as it's a better, less costly solution than buying a new filter replacement when the issue is too late for repair. Sometimes merely removing the debris in between the filter's micro holes using this flosser tool can make it function back to normal again.
To fix the heating element, you should first check if the heating element has no corrosion resulting from a water supply's low level of PH. Any PH that's below 7.0 is increasing the risk of damaging your heating element as well as tripping your tub's GFCI breaker. If this still isn't fixing the issue, we highly recommend you seek a professional to help find the deeper, more technical problems in the tub.
Problem 2: Control Panel Malfunction
Is your control panel no longer functioning normally? Are you always seeing the error code displayed? We recommend you consult your spa's manual or its online troubleshooting guide to see the meaning of each error code and address the main cause of the problem. Manufacturers vary in the way they display their error codes.
We also suggest you follow the tips mentioned in your tub's manual to know how to prevent such errors from happening, such as only cleaning the control panel with liquid solutions compatible with the tub's brand. Whether or not you own a Balboa hot tub, you might need an adaptor plate if you're planning to replace your broken control panel with a Balboa control panel.
If that's the case, we are recommending the 11718 Balboa Adaptor Plate since it's the necessary, authentic or brand-approved component you need to mount a Balboa control panel in a space with a larger hole that's left by your broken control panel install kit.
Problem 3: Dirty Water
If your tub is already showing dirty, murky and cloudy water and reeking off an unpleasant odor, the main cause of the problem is that algae and other bacteria have already settled in the pool for far too long. To prevent this from happening, it helps to maintain a routine tub water clean-up, or just simply drain the water completely. It also helps if you fix any broken parts in the tub's filtration system.
For a proper water treatment, you need to shock the water and apply the appropriate, tub-specific cleaning chemicals. We suggest you use brand-approved spa chemicals and purifiers to solve this issue, such as the Filter Frog, Mineral Spa Care (01-14-3712) from King Technology.
We like to recommend King Technology's Filter Frog since it's a reliable treatment choice among many users, and it's also easy to use and can create a soft, sparkling clear water without using too much chlorine or bromine.
Problem 4: Pump Making Unwanted Noise
If there's deep growling in your pump or any strange noise, the most likely culprit would have to be the lack of water in the pump. The next best step is to see if there are any blockages and if the water level is filled completely. Double-checking the valves if they're open can also fix the problem.
To prevent such unwanted noise from happening, maybe it's time to replace your pump's parts. If it's compatible with your hot tub's brand, we recommend the .5HP 1.5"x1.5" Top Disch Wet End FR from Advantage Manufacturing . We like to recommend this wet end because it's made by an established brand whose goal is to ensure that your spa can deliver bubbles and powerful massaging water streams without issues in the water circulation.